(!******************************************************* Mosel Example Problems ====================== file runrtdistr.mos ``````````````````` Running a model on a remote machine, passing runtime parameters to the submodel. Before running this model, you need to set up the NODENAME with a machine name/address of your local network. The node that is used needs to have the same version of Xpress installed and suitably licensed, and the server "xprmsrv" must have been started on this machine. (c) 2010 Fair Isaac Corporation author: S. Heipcke, May 2010 *******************************************************!) model "Run model rtparams remotely" uses "mmjobs" declarations modPar: Model mosInst: Mosel end-declarations ! Compile the model file if compile("rtparams.mos")<>0 then exit(1); end-if !!! Use the name or IP address of a machine in !!! your local network, or "" for current node NODENAME:= "" ! Open connection to a remote node: if connect(mosInst, NODENAME)<>0 then exit(2); end-if ! Load the bim file into the remote instance load(mosInst, modPar, "rmt:rtparams.bim") ! Start model execution run(modPar, "PARAM1=" + 2 + ",PARAM2=" + 3,4 + ",PARAM3='a string'" + ",PARAM4=" + true) wait ! Wait for model termination dropnextevent ! Ignore termination event message end-model