| runtestsub.mos |
(!*******************************************************
Mosel Example Problems
======================
file runtestsub.mos
```````````````````
Running a model from another Mosel model,
waiting for the submodel termination.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsub"
uses "mmjobs"
declarations
modSub: Model
end-declarations
! Compile the model file
if compile("testsub.mos")<>0 then exit(1); end-if
load(modSub, "testsub.bim") ! Load the bim file
! Uncomment one of the following lines to redirect the submodel output
! setdefstream(modSub, F_OUTPUT, "testout.txt") ! Output to file
! setdefstream(modSub, F_OUTPUT, "tee:testout.txt&")
! Output to file and on screen
! setdefstream(modSub, F_OUTPUT, "null:") ! Disable all output
run(modSub) ! Start model execution
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-model
|
|
| testsub.mos |
(!*******************************************************
Mosel Example Problems
======================
file testsub.mos
````````````````
Simple model printing some output.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Test submodel"
! Uncomment one of the following lines to redirect output to a file
! fopen("testout.txt", F_OUTPUT+F_APPEND) ! Output to file (in append mode)
! fopen("tee:testout.txt&", F_OUTPUT) ! Output to file and on screen
! fopen("null:", F_OUTPUT) ! Disable all output
forall(i in 10..20) write(i^2, " ")
writeln
! Uncomment if output is redirected
! fclose(F_OUTPUT)
end-model
|
|
| runsubevnt.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubevnt.mos
```````````````````
Running a model from another Mosel model,
getting the submodel termination status.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsub"
uses "mmjobs"
declarations
modSub: Model
ev: Event
end-declarations
! Compile the model file
if compile("testsub.mos")<>0 then exit(1); end-if
load(modSub, "testsub.bim") ! Load the bim file
run(modSub) ! Start model execution
wait(1) ! Wait 1 second for an event
if isqueueempty then ! No event has been sent: model still runs
stop(modSub) ! Stop the model
wait ! Wait for model termination
end-if
ev:=getnextevent ! An event is available: model finished
writeln("Event class: ", getclass(ev))
writeln("Event value: ", getvalue(ev))
writeln("Exit code : ", getexitcode(modSub))
end-model
|
|
| runsubwait.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubwait.mos
```````````````````
Running a model from another Mosel model,
waiting for the submodel termination.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsub"
uses "mmjobs"
declarations
modSub: Model
end-declarations
! Compile the model file
if compile("testsub.mos")<>0 then exit(1); end-if
load(modSub, "testsub.bim") ! Load the bim file
run(modSub) ! Start model execution
wait(1) ! Wait 1 second for an event
if isqueueempty then ! No event has been sent: model still runs
writeln("Stopping the submodel")
stop(modSub) ! Stop the model
wait ! Wait for model termination
end-if
dropnextevent ! Ignore termination event message
end-model
|
|
| runsubmem.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubmem.mos
``````````````````
Running a model from another Mosel model,
compilation to memory.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsub"
uses "mmjobs", "mmsystem"
declarations
modSub: Model
end-declarations
! Compile the model file
if compile("", "testsub.mos", "shmem:testsubbim")<>0 then
exit(1)
end-if
load(modSub, "shmem:testsubbim") ! Load the bim file from memory
fdelete("shmem:testsubbim") ! ... and release the memory block
run(modSub) ! Start model execution
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-model
|
|
| runrtparam.mos |
(!*******************************************************
Mosel Example Problems
======================
file runrtparam.mos
```````````````````
Running a model from another Mosel model,
passing runtime parameters to the submodel.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model rtparams"
uses "mmjobs"
declarations
modPar: Model
end-declarations
! Compile the model file
if compile("rtparams.mos")<>0 then exit(1); end-if
load(modPar, "rtparams.bim") ! Load the bim file
! Start model execution
run(modPar, "PARAM1=" + 2 + ",PARAM2=" + 3.4 +
",PARAM3='a string'" + ",PARAM4=" + true)
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-model
|
|
| runrtparam2.mos |
(!*******************************************************
Mosel Example Problems
======================
file runrtparam2.mos
````````````````````
Running a model from another Mosel model,
passing runtime parameters to the submodel.
- Using 'setmodpar' -
(c) 2014 Fair Isaac Corporation
author: S. Heipcke, Sep. 2014
*******************************************************!)
model "Run model rtparams"
uses "mmjobs", "mmsystem"
declarations
modPar: Model
params: text
end-declarations
! Compile the model file
if compile("rtparams.mos")<>0 then exit(1); end-if
load(modPar, "rtparams.bim") ! Load the bim file
setmodpar(params, "PARAM1", 2) ! Set values for model parameters
setmodpar(params, "PARAM2", 3.4)
setmodpar(params, "PARAM3", 'a string')
setmodpar(params, "PARAM4", true)
run(modPar, params) ! Start model execution
params:= "" ! Delete the parameters definition
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-model
|
|
| rtparams.mos |
(!*******************************************************
Mosel Example Problems
======================
file rtparams.mos
`````````````````
Model with different runtime parameter types;
can be run as submodel from models 'runrtpar*.mos'.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Runtime parameters"
parameters
PARAM1 = 0
PARAM2 = 0.5
PARAM3 = ''
PARAM4 = false
end-parameters
writeln(PARAM1, " ", PARAM2, " ", PARAM3, " ", PARAM4)
end-model
|
|
| runrtparseq.mos |
(!*******************************************************
Mosel Example Problems
======================
file runrtparseq.mos
````````````````````
Running several instances of a model from another
Mosel model.
- Sequential submodels -
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006, rev. May 2010
*******************************************************!)
model "Run model rtparams in sequence"
uses "mmjobs"
declarations
A = 1..10
modPar: Model
end-declarations
! Compile the model file
if compile("rtparams.mos")<>0 then exit(1); end-if
load(modPar, "rtparams.bim") ! Load the bim file
forall(i in A) do ! Start model execution
run(modPar, "PARAM1=" + i + ",PARAM2=" + 0.1*i +
",PARAM3='string " + i + "'" + ",PARAM4=" + isodd(i))
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-do
end-model
|
|
| runrtparprl.mos |
(!*******************************************************
Mosel Example Problems
======================
file runrtparprl.mos
````````````````````
Running several instances of a model from another
Mosel model.
- Parallel submodels -
*** ATTENTION: This model will return an error if no ***
*** sufficient number of Xpress licences is available ***
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006, rev. May 2010
*******************************************************!)
model "Run model rtparams in parallel"
uses "mmjobs"
declarations
A = 1..10
modPar: array(A) of Model
end-declarations
! Compile the model file
if compile("rtparams.mos")<>0 then exit(1); end-if
forall(i in A) do
load(modPar(i), "rtparams.bim") ! Load the bim file
! Start model execution
run(modPar(i), "PARAM1=" + i + ",PARAM2=" + 0.1*i +
",PARAM3='string " + i + "'" + ",PARAM4=" + isodd(i))
end-do
forall(i in A) do
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
end-do
end-model
|
|
| runrtparqueue.mos |
(!*******************************************************
Mosel Example Problems
======================
file runrtparqueue.mos
``````````````````````
Running several instances of a model from another
Mosel model.
- Queuing submodels for parallel execution
in a limited number of processes -
*** ATTENTION: This model will return an error if ***
*** no more than one Xpress licence is available. ***
*** With a single license, use setting NUMPAR=1 ***
(c) 2010 Fair Isaac Corporation
author: S. Heipcke, Apr. 2010, rev. Jun. 2015
*******************************************************!)
model "Run model rtparams with job queue"
uses "mmjobs"
parameters
J=10 ! Number of jobs to run
NUMPAR=2 ! Number of parallel model executions
end-parameters ! (preferrably <= no. of processors)
forward procedure start_next_job(submod: Model)
declarations
RM = 1..NUMPAR ! Model indices
JOBS = 1..J ! Job (instance) indices
modPar: array(RM) of Model ! Models
jobid: array(set of integer) of integer ! Job index for model UIDs
JobList: list of integer ! List of jobs
JobsRun: set of integer ! Set of finished jobs
JobSize: integer ! Number of jobs to be executed
Msg: Event ! Messages sent by models
end-declarations
! Compile the model file
if compile("rtparams.mos")<>0 then exit(1); end-if
forall(m in RM) do
load(modPar(m), "rtparams.bim") ! Load the bim file
modPar(m).uid:= m ! Store the model ID
end-do
JobList:= sum(i in JOBS) [i] ! Define the list of jobs (instances)
JobSize:=JobList.size ! Store the number of jobs
JobsRun:={} ! Set of terminated jobs is empty
!**** Start initial lot of model runs ****
forall(m in RM)
if JobList<>[] then
start_next_job(modPar(m))
end-if
!**** Run all remaining jobs ****
while (JobsRun.size<JobSize) do
wait ! Wait for model termination
! Start next job
Msg:= getnextevent
if Msg.class=EVENT_END then ! We are only interested in "end" events
m:= Msg.fromuid ! Retrieve the model ID
JobsRun+={jobid(m)} ! Keep track of job termination
writeln("End of job ", jobid(m), " (model ", m, ")")
if JobList<>[] then ! Start a new run if queue not empty
start_next_job(modPar(m))
end-if
end-if
end-do
!*************************************************************************
procedure start_next_job(submod: Model)
i:=getfirst(JobList) ! Retrieve first job in the list
cuthead(JobList,1) ! Remove first entry from job list
jobid(submod.uid):= i ! Save job index for this model
writeln("Start job ", i, " (model ", submod.uid, ")")
run(submod, "PARAM1=" + i + ",PARAM2=" + 0.1*i +
",PARAM3='string " + i + "'" + ",PARAM4=" + isodd(i))
end-procedure
end-model
|
|
| runsubshm.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubshm.mos
``````````````````
Running a model from another Mosel model.
Communication of data from/to master model
using 'shmem' IO driver with 'bin'.
(c) 2011 Fair Isaac Corporation
author: S. Heipcke, April 2011
*******************************************************!)
model "Run model testsubshm"
uses "mmjobs"
declarations
modSub: Model
A = 30..40
B: array(A) of real
end-declarations
! Compile the model file
if compile("testsubshm.mos")<>0 then exit(1); end-if
load(modSub, "testsubshm.bim") ! Load the bim file
initializations to "bin:shmem:indata"
A
end-initializations
run(modSub) ! Start model execution
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
initializations from "bin:shmem:resdata"
B
end-initializations
writeln(B)
end-model
|
|
| testsubshm.mos |
(!*******************************************************
Mosel Example Problems
======================
file testsubshm.mos
```````````````````
Simple model printing some output.
Communication of data from/to master model
using 'shmem' IO driver with 'bin'.
(c) 2011 Fair Isaac Corporation
author: S. Heipcke, April 2011
*******************************************************!)
model "Test submodel"
declarations
A: range
B: array(A) of real
end-declarations
initializations from "bin:shmem:indata"
A
end-initializations
forall(i in A) B(i):= i^2
initializations to "bin:shmem:resdata"
B
end-initializations
end-model
|
|
| runsubshmr.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubshmr.mos
```````````````````
Running a model from another Mosel model.
Communication of data from/to master model
using 'shmem' IO driver with 'raw'.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsubshmr"
uses "mmjobs"
declarations
modSub: Model
A = 30..40
B: array(A) of real
end-declarations
! Compile the model file
if compile("testsubshmr.mos")<>0 then exit(1); end-if
load(modSub, "testsubshmr.bim") ! Load the bim file
initializations to "raw:"
A as "shmem:A"
end-initializations
run(modSub) ! Start model execution
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
initializations from "raw:"
B as "shmem:B"
end-initializations
writeln(B)
end-model
|
|
| testsubshmr.mos |
(!*******************************************************
Mosel Example Problems
======================
file testsubshmr.mos
````````````````````
Simple model printing some output.
Communication of data from/to master model
using 'shmem' IO driver with 'raw'.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Test submodel"
declarations
A: range
B: array(A) of real
end-declarations
initializations from "raw:"
A as "shmem:A"
end-initializations
forall(i in A) B(i):= i^2
initializations to "raw:"
B as "shmem:B"
end-initializations
end-model
|
|
| runsubpip.mos |
(!*******************************************************
Mosel Example Problems
======================
file runsubpip.mos
``````````````````
Running a model from another Mosel model.
Communication of data from/to master model
using 'mempipe' IO driver.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Run model testsubpip"
uses "mmjobs"
declarations
modSub: Model
A = 30..40
B: array(A) of real
end-declarations
! Compile the model file
if compile("testsubpip.mos")<>0 then exit(1); end-if
load(modSub, "testsubpip.bim") ! Load the bim file
run(modSub) ! Start model execution
initializations to "mempipe:indata"
A
end-initializations
initializations from "mempipe:resdata"
B
end-initializations
wait ! Wait for model termination
dropnextevent ! Ignore termination event message
writeln(B)
end-model
|
|
| testsubpip.mos |
(!*******************************************************
Mosel Example Problems
======================
file testsubpip.mos
```````````````````
Simple model printing some output.
Communication of data from/to master model
using 'mempipe' IO driver.
(c) 2008 Fair Isaac Corporation
author: S. Heipcke, May 2006
*******************************************************!)
model "Test submodel"
declarations
A: range
B: array(A) of real
end-declarations
initializations from "mempipe:indata"
A
end-initializations
forall(i in A) B(i):= i^2
initializations to "mempipe:resdata"
B
end-initializations
end-model
|
|
