XSLP_CONVERGENCEOPS

Bit map describing which convergence tests should be carried out

Integer

Bit	Meaning
0	Execute the closure tolerance checks.
1	Execute the delta tolerance checks.
2	Execute the matrix tolerance checks.
3	Execute the impact tolerance checks.
4	Execute the slack impact tolerance checks.
5	Check for user provided convergence.
6	Execute the objective range checks.
7	Execute the objective range + constraint activity check.
8	Execute the objective range + active step bound check.
9	Execute the convergence continuation check.
10	Take scaling of individual variables / rows into account.
11	Execute the validation target convergence checks.
12	Execute the first order optimality target convergence checks.

7167 (bits 0-9 and 11-12 are set)

Provides fine tuned control (over setting the related convergence tolerances) of which convergence checks are carried out.

The following constants are provided for setting these bits:

Setting bit 0	XSLP_CONVERGEBIT_CTOL
Setting bit 1	XSLP_CONVERGEBIT_ATOL
Setting bit 2	XSLP_CONVERGEBIT_MTOL
Setting bit 3	XSLP_CONVERGEBIT_ITOL
Setting bit 4	XSLP_CONVERGEBIT_STOL
Setting bit 5	XSLP_CONVERGEBIT_USER
Setting bit 6	XSLP_CONVERGEBIT_VTOL
Setting bit 7	XSLP_CONVERGEBIT_XTOL
Setting bit 8	XSLP_CONVERGEBIT_OTOL
Setting bit 9	XSLP_CONVERGEBIT_WTOL
Setting bit 10	XSLP_CONVERGEBIT_EXTENDEDSCALING
Setting bit 11	CONVERGEBIT_VALIDATION
Setting bit 12	CONVERGEBIT_VALIDATION_K

XSLPmaxim, XSLPminim